Cabezal Angular 90° - CAT40 para boquillas ER40 modelo AHA-CAT40-ER40
MXN 112,240.80 + Tax
In stock
Only 3 left
SKU
HW-AHA-CAT40-ER40
Maquina por 5 lados en tu centro de maquinado, realiza operaciones verticales, horizontales, exteriores e interiores.
Beneficios:
- Ahorra tiempo
- Mejora la precisión
- Acelera la producción
- Disminuye errores por reposicionamientos
Dimensiones de Cabezal Angular (mm)
| Modelo No. | AHA-CAT40-ER40 |
|---|---|
| A | 160 |
| B | 40 |
| C | 98 |
| D | 103 |
| E Max | 44 |
| F | 65 |
| G | 56 |
| H | 63 |
| I | 88 |
| J | ER40 |
| K | 15 |
| L | 65/80/85 |
| Peso (KG) | 7.8 |
¿Por que añadir un cabezal a tu centro de maquinado?
Diagrama del Set de Mandrinado - CAT40 NBH2084
| Pieza | Rango de mandrinado | Dimensión | Inserto | Tornillo | Llave |
| Cono CAT40 NBH2084 | -- | -- | -- | -- | -- |
| Barra BJ2008-32 | 8-11 mm | 32 | TBGT0601..L | MS2005A | T6 |
| Barra BJ2010-40 | 10-13 mm | 40 | TBGT0601..L | MS2005A | T6 |
| Barra BJ2012-53 | 12-17 mm | 53 | TPGH0902..L | MS2506A | T9 |
| Barra BJ2016-68 | 16-21 mm | 68 | TPGH0902..L | MS2506A | T9 |
| Barra BJ2020-83 | 20-130 mm | 83 | TPGH1103..L | MS3008A | T9 |
| Barra BJ2025-96 | 25-135 mm | 96 | TPGH1103..L | MS3008A | T9 |
| Barra BJ2030-115 | 30-140 mm | 115 | TPGH1103..L | MS3008A | T9 |
| Barra BJ20-20L | 120-280 mm | 83 + L | TPGH1103..L | MS3008A | T9 |
Product Details
| SKU | HW-AHA-CAT40-ER40 |
|---|---|
| Weight (Kg) | 7.8000 |
| Manufacturer | Hold Well |
Caracteristicas Cabezal Angular 90°
| Taper | CAT-40 |
|---|---|
| Holder type | ER40 |
| Cutting angle | 90° |
| Run-out | 0.002 mm |
| Gear ratio | 1:0.81 |
| Output rotation | Reverse to input rotation |
| Material de Fabricación | Ductile cast iron |
| Revoluciones máx. | 6,000 rpm |
| Torque Max. | 50 Nm |
| Tipo de cono | CAT |
Write Your Own Review
Compatible Products
